ALUMINIUM ALLOYS
«SpectroLab» model LAVFA05A
Alloy’s chemical composition is defined with the help of atomic emission optical spectrometer “SpectroLab”, the model LAVFA05A, produced by «
Availability of standard samples in a large quantity gives an opportunity of setting a device to monitor quite any alloy.
In a process of smelting a constant 
The control system enables to cross-check quality of already shipped finished goods.
Every express-analysis results and samples-molds of every smelting are kept in a laboratory’s archives for a year.
The laboratory is approved by state certification bodies.
Basic metrological parameters (AL matrix)
Atomic emission optical spectrometer «SpectroLab» model LAVFA05A
| Measurements range, % | |||
| Si | 0.005 | - | 24.20 |
| Fe | 0.01 | - | 6.000 |
| Cu | 0.01 | - | 11.60 |
| Mn | 0.005 | - | 12.90 |
| Mg | 0.005 | - | 7.000 |
| Zn | 0.005 | - | 11.10 |
| Ti | 0.001 | - | 0.400 |
| Cr | 0.005 | - | 0.500 |
| Ni | 0.01 | - | 3.000 |
| Pb | 0.005 | - | 1.000 |
| Sn | 0.005 | - | 0.700 |
| Li | 0.0001 | - | 0.014 |
| B | 0.0005 | - | 0.012 |
| V | 0.001 | - | 0.120 |
| Sb | 0.001 | - | 0.300 |
| Ca | 0.0005 | - | 0.120 |
| Be | 0.0001 | - | 0.250 |
| Zr | 0.001 | - | 0.250 |
Metrological parameters
(Results convergence of parallel definitions and reproducibility of analysis’s results meet the requirements of ND for analysis’s methods.)
LOST FOAM CASTING
«SpectroLab» model LAVMB18A
Alloy’s chemical composition is defined with the help of atomic emission optical spectrometer «SpectroLab» model LAVMB18A, produced by «
Laboratory’s analytical programs enable chemical composition monitoring of most of casting steels and cast irons.
Basic metrological parameters (Fe matrix)
Atomic emission optical spectrometer «SpectroLab» model LAVMB18A
| Measurements range, % | |||
| C | 0.002 | - | 3.00 |
| Si | 0.005 | - | 6.00 |
| Mn | 0.005 | - | 19.6 |
| P | 0.005 | - | 1.15 |
| S | 0.0005 | - | 0.25 |
| Cr | 0.005 | - | 30.0 |
| Mo | 0.01 | - | 9.50 |
| Ni | 0.01 | - | 46.0 |
| Al | 0.002 | - | 3.10 |
| Co | 0.01 | - | 10.0 |
| Cu | 0.01 | - | 5.00 |
| W | 0.005 | - | 20.0 |
| V | 0.01 | - | 3.50 |
| Nb | 0.01 | - | 2.50 |
Metrological parameters
(Results convergence of parallel definitions and reproducibility of analysis’s results meet the requirements of ND for analysis’s methods.)
модель ММР-4
Metallographic microscope working model ММР-4
To control the structure of the metal in the casting.
Technical specifications and features
Metallographic microscope working modelММР-4
| Увеличение микроскопа | от 50 до 1600 |
| Предметный стол: | |
| пределы перемещения в двух взаимно перпендикулярных направлениях, мм |
от 0 до 30 и от 55 до 75 |
| цена деления шкалы, мм | 1 |
| цена деления шкалы с нониусом, мм | 0.1 |
| пределы поворота | от 0° до 360° |
| Максимальная нагрузка, кг | 3 |
| Источник света- лампа накаливания с йодным циклом | КГМ9-70 |
| Полная мощность потребляемая микроскопом, Вт | 95 |
| Габаритные размеры микроскопа, мм | 550x410x270 |
| Масса микроскопа, кг | 30 |
модель ТК-2М
Hardness tester ТК-2М
Hardness tester is designed to measure the hardness of metals and alloys
method Rockwell.